Key takeaways
- Pros: Published dimensions match the OEM spec exactly; owners report a snug slide into standard tracks without forcing or trimming.
- Aluminum mesh construction holds up through repeated dishwasher cycles without warping.
- Con: At $14.93, it costs roughly fifty percent more than the identical part listed elsewhere in this roundup.
What's inside
A clogged or mismatched range hood filter turns your kitchen ventilation into decoration. Grease accumulates on surfaces, smoke lingers after searing, and odors settle into curtains and upholstery. The fix is rarely a new hood — it is replacing the filter with one that matches your unit’s dimensions and captures what your hood was designed to capture. The problem is that the market is flooded with near-identical listings for the same part numbers, and the price spread between them can exceed ninety percent for what appears to be the same filter.
This roundup focuses on range hood filters that appear repeatedly in owner replacement discussions for Broan, Nutone, and GE-compatible hoods. We compared published dimensions, part numbers, material descriptions, and aggregated owner feedback across hundreds of listings. The goal is not to crown a single winner but to clarify which options offer the best fit and value for specific hood models, and where the same filter appears at wildly different price points.
As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Product prices and availability are accurate as of the date shown and are subject to change.
Quick Picks
| Product | Best For | Price |
|---|---|---|
| Broan 97007696 Standard | Common mid-size hoods at a fair single-unit price | $14.93 |
| Broan 97007696 Budget Offer | Buyers replacing one filter who want the lowest listed price | $9.96 |
| Broan BPS1FA30 | Larger hood openings requiring 11.8 x 14.3 coverage | $18.93 |
| Bagean GE WB06X10309 | GE over-the-range microwave grease filters | $11.93 |
| Broan 97006931 Full Price | Specific 97006931 hood owners who value listing trust over savings | $18.98 |
| Broan 97006931 Value Offer | Same part number at a meaningfully lower listing price | $13.43 |
| Amazinpure 4-Pack BP29 | Households that replace filters regularly and want bulk pricing | $16.14 |
| Broan 97007696 Premium Offer | Same 97007696 part listed at the highest observed price | $18.99 |
How We Picked
Four criteria drove this selection. First, dimensional accuracy: a filter that is even a quarter-inch off will leave gaps or refuse to seat, so we prioritized listings whose published sizes match the OEM part number exactly. Second, compatibility breadth: filters that fit multiple hood models within a family (Broan and Nutone share many part numbers) score higher because they serve more households. Third, price-per-unit reasonableness relative to the same part number across listings. Fourth, material and construction feedback from owners who reported how the filter performed over several months of use, including whether it warped, shed fibers, or held up through dishwasher cleaning.
The 8 Best Range Hood Filters in 2026
Broan 97007696 Standard
This is the middle-of-the-road listing for the 97007696 aluminum mesh filter, sized at 10.5 x 8.8 inches. It suits owners of the large family of Broan and Nutone hoods that take this part number, which covers a substantial share of residential kitchen range hoods.
- Pros: Published dimensions match the OEM spec exactly; owners report a snug slide into standard tracks without forcing or trimming.
- Aluminum mesh construction holds up through repeated dishwasher cycles without warping.
- Con: At $14.93, it costs roughly fifty percent more than the identical part listed elsewhere in this roundup.
Skip this listing if you see the same part number at a lower price elsewhere and the seller rating is comparable.
Broan 97007696 Budget Offer
Identical dimensions and part number to the listing above, but this one appears at $9.96. For owners of any 97007696-compatible hood, this is the lowest observed price for that specific filter in 2026, making it the obvious entry point for single replacements.
- Pros: Price is the best value in this category by a clear margin; dimensions and material match the OEM spec as listed.
- Owners note it fits the same as pricier variants with no perceptible difference in grease capture during the first few months.
- Con: Lower-priced listings sometimes ship without a protective sleeve, so minor surface scratching on the aluminum is reported.
If you need a filter that looks pristine out of the box for a visible under-cabinet install, consider a higher-listed variant.
Broan BPS1FA30
Sized at 11.8 x 14.3 inches, this filter addresses larger hood openings where the 10.5-class simply cannot seat. The BPS1FA30 part number corresponds to a specific line of wider Broan and Nutone units found in galley kitchens and some builder-grade installations.
- Pros: The oversized format captures more surface area, reducing the gap between filter edge and housing walls.
- Owners of compatible hoods report noticeably improved grease separation compared to aftermarket alternatives that barely touch the tracks.
- Con: At $18.93, it is the second-highest single-unit price in this roundup.
Only relevant if your hood manual or existing filter bears this part number or matching dimensions; otherwise you are buying an oversized filter.
Bagean GE WB06X10309
This is the one option here designed for GE over-the-range microwaves rather than traditional range hoods. At 7.6 x 5.1 inches, it is the smallest filter in this group and fits the grease-filter slot found above the stovetop on many GE microwave models.
- Pros: Direct replacement for a common GE part number that is frequently out of stock at appliance retailers.
- Owners confirm it snaps into the GE track without modification.
- Con: Limited to microwave-style ventilation; useless if you have a conventional hood or a different brand.
Unless your unit is a GE over-the-range microwave, this filter does not belong in your cart.
Broan 97006931 Full Price
The 97006931 is a separate part number from the 97007696, sized at 10.5 x 8.75 inches. It fits a different subset of Broan and Nutone hoods, and this listing offers it at $18.98, the highest single-unit price in this roundup.
- Pros: Exact OEM part number match, which matters for owners whose local appliance store or service technician requests it by number.
- Aluminum mesh construction is consistent across owner reports.
- Con: The price premium over the value offer below is more than forty percent for an identical part.
Pick this only if a seller or listing warranty explicitly requires purchase from a specific storefront.
Broan 97006931 Value Offer
Same part number, same dimensions, same material class as the listing above, offered at $13.43. For owners of hoods that require 97006931, this is the practical choice.
- Pros: Meaningful savings over the full-price listing for no described difference in the filter itself.
- Owners confirm the quarter-inch smaller height compared to the 97007696 series is intentional and correct for their hoods.
- Con: Some listings in this range ship as generic-brand equivalents rather than Broan-boxed parts, which can complicate warranty claims.
Check whether the listing specifies genuine Broan packaging if that matters for your hood’s warranty.
Amazinpure 4-Pack BP29
The only multi-unit option here, the Amazinpure four-pack provides four 10.5 x 8.75-inch filters compatible with the Broan 97006931 and BP29 designations. At $16.14 total, the per-filter cost drops well below any single-unit listing in this comparison.
- Pros: Bulk pricing makes regular replacement realistic for households that cook heavily and change filters quarterly.
- Owners report consistent dimensions across all four units in the pack.
- Con: Aftermarket branding; material thickness and mesh density may differ subtly from genuine Broan parts, which some owners notice after the first cycle.
If your hood requires exact OEM mesh density for odor control, single genuine listings may serve you better despite the higher per-unit cost.
Broan 97007696 Premium Offer
Completing the trio of 97007696 listings, this option sits at the top of the observed price range at $18.99. The filter dimensions and material are identical to the other two listings of this part number.
- Pros: Sellers at this price point sometimes bundle a cleaning brush or include priority shipping, which is listed as an extra rather than baked into the unit cost of cheaper options.
- Dimensions match the 97007696 OEM spec exactly.
- Con: Ninety percent above the budget listing for the same part, and the claimed extras may be available separately for far less.
Skip this unless the specific bundle or shipping terms matter to you more than the filter price alone.
Buying Guide
Dimensional Precision Is Everything
Range hood filters work by friction-fit in metal tracks. A filter that is even a few millimeters short leaves unfiltered air bypassing the mesh, while one that is oversized will not seat and may bow under airflow. Before buying, pull the existing filter and measure the longest dimensions, then cross-reference against your hood’s model number or the stamped part number on the old filter’s frame. The listings above span from 7.6 x 5.1 inches to 11.8 x 14.3 inches, and a buyer who confuses 10.5 x 8.8 with 10.5 x 8.75 will end up with a filter that wobbles in the track.
Material Type Determines Maintenance and Lifespan
All options in this roundup are aluminum mesh filters, which means they are reusable and typically dishwasher-safe. The variable is mesh density and frame rigidity. Thinner aluminum flexes during cleaning, causing the frame to lose squareness and fit poorly over time. Owner feedback consistently flags the difference between filters that survive three wash cycles and those that warp after one. If your cooking produces heavy grease (frying, grilling, searing), a slightly sturdier frame matters more than marginal price savings.
OEM Number Versus Aftermarket Fit
A genuine Broan or Nutone part number guarantees the filter was designed for a specific hood family. Aftermarket equivalents like the Amazinpure four-pack list compatibility with those same part numbers but are manufactured by third parties. The fit is usually identical, but mesh density, frame gauge, and coating durability can vary between production runs. For most households, the aftermarket option is fine. For hoods under active manufacturer warranty or in commercial-adjacent settings, sticking to the exact OEM listing reduces dispute risk.
Our Verdict
Top pick: The Broan 97007696 Budget Offer at $9.96 delivers the same verified dimensions and material class as its pricier twins while costing roughly half. For the largest compatible hood population in this group, it is the default replacement.
Budget pick: The Amazinpure 4-Pack at $16.14 breaks down to about $4 per filter, the lowest per-unit cost here, ideal for households replacing filters on a regular schedule.
When another product wins: If your hood takes the 97006931 part number rather than the 97007696, the Value Offer at $13.43 is your pick, not the 97007696 listings — the quarter-inch height difference is not interchangeable.
FAQ
How often should I replace a range hood filter?
Aluminum mesh filters are technically reusable and last indefinitely if maintained, but most owners replace them every twelve to twenty-four months when the mesh begins shedding fibers or the frame loses rigidity. Carbon-based filters within the same hood housing, if present, require replacement roughly every three to six months.
Can I wash a range hood filter instead of replacing it?
Yes. Most aluminum mesh filters, including every option in this roundup, are dishwasher-safe or can be soaked in hot soapy water with a degreasing agent. Regular cleaning extends functional life significantly and reduces the number of replacements needed per year.
Are Broan and Nutone range hood filters interchangeable?
In most cases yes. Nutone is a Broan subsidiary, and many part numbers overlap directly. The listings above reference both brand names because the same physical filter is sold under either name depending on the retail channel. Confirm the part number stamped on your old filter rather than relying solely on the brand on the hood exterior.
Do aftermarket filters reduce ventilation performance?
If dimensions match exactly and mesh density is within OEM tolerance, performance differences are negligible in short-term use. The risk with aftermarket options is long-term: thinner frames may warp after a few dishwasher cycles, gradually introducing gaps that reduce airflow capture. For light cooking, the savings are worthwhile; for heavy daily use, the OEM-spec listings offer more predictable lifespan.
